Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
Water cleanup, fast dry
Easy application with excellent adhesion
Very good resistance to water and chemicals
Excellent for use on basement floors
Meets qualifications for LEED when used over metal substrates
Waterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
Water cleanup, fast dry
Easy application with excellent adhesion
Very good resistance to water and chemicals
Excellent for use on basement floors
Meets qualifications for LEED when used over metal substrates
Waterborne Epoxy Block Filler is a high-solids epoxy block filler that can be cleaned up with soap and water. This product withstands repeated cleanings with high pressure water and can be top coated with most generic type coatings.
*After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time. **Based on Benjamin Moore lab test results. Label and technical data sheet recommendations must be followed including priming recommendations over masonry where applicable.
Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with pH levels as high as 13.
Recommended for: For application to new or previously painted interior/exterior surfaces including: tilt-up concrete construction, stucco surfaces, block construction.
A high-performance, one-component latex coating specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistant properties than traditional 2-component coatings, pre-mixing, short pot-life and application difficulties related to similar products. This paint will retain its high-quality appearance much longer with minimal maintenance.
Proprietary scuff-resistance formula
Single-component Paint
Washable
Quick dry
Great touch-up
Spatter resistant
Easy application
Qualifies for LEED® v4 credit
CHPS certified
Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint
Recommended for: For commercial applications. Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, retail fitting rooms, cafeterias, offices and conference rooms.
*After application over wood, primed surfaces or previously painted surfaces (77°F / 50% RH). Other surfaces such as hardboard or vinyl may require a longer dry time.
Designed to penetrate and seal the surface of new or previously painted masonry surfaces providing the proper foundation for subsequent finish coats. It can be applied to masonry with Ph levels as high as 13.
Recommended for: For application to new or previously painted masonry surfaces including; tilt-up concrete construction, stucco surfaces and block construction.
A single-component, high-performance latex paint that offers a unique blend of toughness and flexibility, rather than just relying on a hard surface, which can be more brittle and subject to chipping. In addition to the superior scuff-resistance, this finish features proprietary CHIP-TECH® chip-resistant technology engineered to withstand the glancing blows and irregular hits that elevator doors, trim, and columns receive on a daily basis.
Recommended for: For commercial applications. Ideal for elevator doors, door jambs, columns, windows, trim and base boards and other high-traffic commercial and light industrial areas.
A high-build, flexible 100% acrylic coating. When applied as directed, up to 20 mils wet film thickness, this product bridges minor surface imperfections, provides outstanding durability, and offers long lasting protection.
Reduces the porosity of masonry surfaces
Breathable finish allows interior moisture to escape w/o damage to the film
Provides a waterproof finish that protects structures from moisture damage
Recommended for: For use on exterior masonry surfaces such as smooth stucco, concrete block, pre-cast concrete, poured in place concrete and tilt-up construction.
A high-performance, one-component latex coating specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistant properties than traditional 2-component coatings, pre-mixing, short pot-life and application difficulties related to similar products. It will hold up to repeat washing without causing permanent damage to the paint. With its slight gloss, the Satin finish offers the benefits of richer look that is perfect elevator areas, stairwells and locker rooms.
Proprietary scuff-resistance formula
Single-component Paint
Washable
Quick dry
Great touch-up
Spatter resistant
Easy application
Qualifies for LEED® v4 credit
CHPS certified
Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint
Recommended for: For commercial applications. Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, retail fitting rooms, cafeterias, offices and conference rooms.
A high-performance, one-component latex coating specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This breakthrough product offers superior durability and scuff-resistant properties than traditional 2-component coatings, pre-mixing, short pot-life and application difficulties related to similar products. This paint will retain its high-quality appearance much longer with minimal maintenance.
Proprietary scuff-resistance formula
Single-component Paint
Washable
Quick dry
Great touch-up
Spatter resistant
Easy application
Qualifies for LEED® v4 credit
CHPS certified
Contains anti-microbial additives that inhibit the growth of mold and mildew on the surface of the paint
Recommended for: For commercial applications. Ideal for high-traffic areas in commercial spaces such as school hallways, hospital waiting areas, hotels lobbies, retail fitting rooms, cafeterias, offices and conference rooms.
Prime Lock Plus is a fast-drying alkyd resin coating that primes and seals plaster, wood, drywall, and previously painted or varnished surfaces. It ensures the paint top coat has consistent sheen and appearance (excellent enamel holdout), seals even the toughest stains without raising the wood grain, and can be top coated with any latex or alkyd finish coat. For interior use and spot priming exterior surfaces.